PenickWhat is floor leatherWhat new signals are released

Domestic cheap decorative paper is usually used. The pattern of this decorative paper is fuzzy. The biggest defect is that it is generally not UV resistant and will fade after sunlight.This is why some consumers reflect the discoloration of the places near the balcony and windows three or four months after the floor is installed. The base material is poor, medium and low density board or particleboard is used, the quality index is unstable, and the formaldehyde seriously exceeds the standard.Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.Penick,First, polish the damaged place with water abrasive paper dipped in soap liquid, and then repair the eyebrow after finishing, then polish the damaged place with water abrasive paper, and then wipe the floor wax for polishing.The flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.Chimbas,We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Color film layer: various decorative layers of wood grain, stone grain and carpet grain, which can meet the different needs of different occasions and different tastes.People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.

Compared with WPC flooring, the price of SPC flooring is reasonable.However, you must choose one that suits your requirements.It&#;s better to spend more money on the floor you need, rather than low-cost floors.How to deal with furniture when replacing a new floor?In order to install a new floor,PenickImported laminate flooring, which is high and has poor water resistance, that is, it is very easy to cause specification change in wet and cold natural environment.Don&#;t listen to misunderstandings such as waterproof floors.Only moisture-proof wood flooring, no moisture-proof wood flooring.When laying wooden floor, pay attention to the length and direction of the floor consistent with the entry direction to ensure good visual effect.First, choose the brand you need (i.e. grade);assets, Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation moisture resistance, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products because low-grade productsThe price is low and there are many prices to choose from, with poor flexibility but many of these products are processed with waste materials, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample,PenickWood floor engineering board, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally,PenickRequirements of SPC floor on the ground, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference color difference and pollution.First, the wear resistance is not as thick as that of reinforced composite floor and double-layer composite floor;The crystal surface is basically flat. It&#;s easy to take care of and clean up.

Wood plastic flooring manufacturer.jpgInspection standard,Fifth, the total thickness of the floor is about , cm, which is also related to his total price. If there are hard objects, check the ground hardness, which shall not be lower than MPa.Defects of solid wood composite floorPenick,Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy. Good fire resistance Super wear resistance