ZhejiangHydraulic elevator structureExecutive standard

Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, inspecting and repairing the equipment and the maintenance site the power transmission test can only be carried out. After the elevator maintenance is completed,ZhejiangDouble cylinder hydraulic lifting platform, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, and whether the equipment still has problems after the maintenance is completed.Single group high-strength mast elevator, with light weight and good maneuverability, suitable for single person operation.Zhejiang,Secondly, for the annual maintenance of elevators, according to certain standards, the following points can be followed. Annual maintenance is a major maintenance,ZhejiangFixed hydraulic lifting platform equipment, so special attention should be paid to the following points: check all hydraulic pipelines and joints of the elevator. The pipeline must not be damaged, and the joints must not be loose. All joints must be tightened.The main lifting mast adopts high-strength profiles, which have high safety and light overall weight.Sakaka,The hydraulic system is equipped with an emergency descent function to prevent power outages and unexpected situations, and the emergency operation is simple.The single column elevator is an indoor type, and can enter general lobbies. It can easily enter and exit the elevator with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall sticking and exploration work, and there are no dead corners during work.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance,ZhejiangHubei hydraulic lifting platform, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.

Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.We can work together for a long timeOperators on the work platform should wear safety belts and be sure to take protective measures when working in live areas.Welcome calls ,Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.Single masted elevators are widely used in factories, hotels, restaurants, stations, cinemas, painting and decorating, replacing lighting fixtures, electrical appliances, and other purposes.It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas from the elevator engine contains carbon monoxide. This is a toxic gas that has been exposed to low concentrations of carbon monoxide for a long time. It can cause symptoms such as headache, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion, and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.

Elevators play an important role in handling, construction, and other operations, providing convenient transportation equipment. More and more elevators are being put into use in the market, but unstable voltage can have a certain impact on elevators during use.Free consultation,Product description of single mast elevator: Single mast lifting platform is suitable for single person climbing operations; The mast is made of high-strength profiles, with high safety and light overall weight; Compact structure, allowing access to narrow passages and elevators; A self-developed integrated built-in slider is used between each mast which reduces the dynamic gap between the masts and makes the operation smoother and more reliable during lifting, far superior to ordinary independent guide wheel support structures; The lifting drive chain adopts a double chain structure and industrial plate chain, with high bearing capacity and safety factor; The guardrail structure is integral and collectible, making it extremely simple and convenient to operate; The hydraulic power unit adopts an integral pump station, with a compact structure and reliable performance; The hydraulic system is equipped with an emergency descent function, which can descend in case of unexpected situations such as power outages; The equipment voltage is V DC, effectively ensuring personal safety; The equipment is equipped with leakage protection switches emergency stop switches, limit switches etc. The button boxes are all waterproof in design.. Shaft section: It is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior.When repairing the elevator, in order to protect the safety of workers and ensure the repair effect, there are many precautions to pay attention to during the maintenance process. We have summarized the relevant matters for your reference only.Zhejiang,Check the hydraulic oil quality and level. When the lifting platform is raised to a high position, the hydraulic oil level should be - millimeters higher than the bottom of the oil tank. When the color of hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, how should the elevator be maintained? While we perform monthly maintenance on the elevator, we should not forget to perform year-end maintenance on the elevator. Let's take a look at how the elevator should undergo year-end maintenance.The elevator features and advantages of a smooth and repair free pivot, with built-in lanyard fixing points. An ergonomic joystick that can be operated from a platform or ground. Year-end maintenance and inspection of hydraulic and pipeline connections. If the pipeline is damaged, it should be replaced immediately; When there is looseness in the connection part, tighten the pipe joint.