KokkolaGeothermal heating floorHow to not rust when working in a humid environment

The road surface is warm for commercial use. Can we use solid wood floor to make the road surface?The third is color.Some customers are very strict about the color of the floor and must maintain the same color difference.But this provision is unscientific.Because the wood is affected by the sun, raw material parts, growth and development parts and lower sawing points,KokkolaHow to deal with the large gap of wooden floor, it will inevitably cause inconsistent color difference.Kokkola,SPC floor is mainly made of calcium carbonate including pur Crystal Shield transparent layer, wear-resistant layer, color film layer, SPC polymer rural base and soft sound insulation rebound layer.Its foreign home decoration sales market is very hot, especially suitable for home furniture floor.The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, which is often called tongue and groove floor, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint, and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient.Azcapotzalco,The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder, which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.Ground lacquer cloth greenThe surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.

Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, and the rag can be half dry.If the floor is dirty, it should be cleaned first and then wiped with neutral detergent.If you are not careful with chemical reagents, preservatives,KokkolaSynthetic wood flooring, etc., please wipe it as soon as possible to avoid whitening or corrosion of the floor.Termites appear on real wood floors and can be sprayed with insecticides.Strong light is easy to crack, especially in summer.The heating room has heating in winter, the air is dry, and the solid wood floor is easy to crack, which is also not conducive to the maintenance of solid wood multi-layer floor. Air humidifier should be used to maintain humidity.When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Product survey, In terms of foot feeling, solid wood is better than reinforcement. According to national industry standards, all solid wood is mm thick, and wood keel ceiling is selected for installation, so the upper foot is better than mm thick reinforcement plate.How to distinguish true and false solid wood flooring?How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first. Rich colors and patterns

From the characteristics of the floor, it is divided into crystal surface, relief surface, silent, waterproof and so on.The cost is reasonable,Finally,To sum up mop the floor with a dry mop in time.Kokkola, the relief is really beautiful;If the same gram of wear-resistant paper is used,KokkolaSPC floor square meter, the wear-resistant degree of crystal is relatively higher than that of relief;The silent foot feel is really good, but it&#;s more expensive;Waterproof and cost-effective. Not many people know its role.Ground lacquer cloth greenDefects: poor wear resistance, no fire prevention, no corrosion resistance very easy to regain moisture, deformation, folding, etc., and must be polished and waxed on time, which is difficult for medical treatment.