the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.Panama,Fourth, high ductility and strong impact resistance.Fourth,PanamaHow thick is the floor leather, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.Molfetta,The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor so its thermal expansion and cold contraction properties are also different;The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :,PanamaFloor leather glue price, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.
Common floor types:The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore, when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor.Maintenance method editing voicePrice,Improve the sense of hierarchy, reliability and cost performance of the floor. Why don&#;t the community owners choose the solid wood floor?Characteristics of fake and shoddy laminate flooring Select machining accuracy
The water resistance is reflected by the water absorption thickness expansion index. If the index value is high, the water resistance is poor, that is, it is easy to cause size change in humid environment.Must not listen to the misleading such as waterproof floor, only moisture-proof floor, no waterproof wooden floor.Quality Assurance Various surface treatments (concave convex pattern, pair pattern, mirror pattern). Select the content standard of dispersed formaldehyde. A foot pad shall be placed in front of the door to reduce the wear of sand on the floor.Panama,Sixth, his specifications and dimensions are also related to his total price.Finally, look at the price Mild warm color flooring is strongly recommended for homes for the elderly and children.Mild and warm colors can make people comfortable and cheerful
