Xingtai Shaheaerated block brickThe power of technology is awesome

technical requirements

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, test methods, inspection rules, product quality instructions,Xingtai ShaheAerated block, stacking, and transportation of autoclaved aerated concrete blocks.　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.Xingtai Shahe,　　Silica sand and slag are ground into slurry with water, then powdered lime, gypsum,Xingtai Shaheaerated block brick, and foaming agent are added, stirred, and injected into the mold frame　　 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, and standard number.Perugia,　　Marking examples: strength level A, bulk density level B, superior　　There are six levels of volumetric density: B, B, B, B, B, and B　　as the main raw materials with an appropriate amount of aerating agent, regulator, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is - times that of reinforced concrete. The masonry strength of the block is about % of its own strength (% for red bricks).

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.　　Very small, with very good seismic performance.　　 Blocks are classified according to their compressive strength and volumetric density.Product survey,　　Marking examples: strength level A, bulk density level B, superior　　 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.

　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table Process inspection,　　 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).　　Condensing materials. As the main raw material. This aerated concrete block has the advantages of insulation moisture resistance, and lightweight.　　as the main raw materials,Xingtai Shaheautoclaved aerated concrete block, with an appropriate amount of aerating agent, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks,　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions stacking, and transportation of autoclaved aerated concrete blocks.　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table