SiverodonetskHow much does it cost to change the floorComparative analysis of repair processes

From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on.Solid wood composite floor gives consideration to strengthening the stability of the floor and the beautiful and generous solid wood floor, which has the advantage of environmental protection.SiverodonetskMoreover, families with laminate floors should also pay attention to the removal methods of daily indoor formaldehyde.The usual practices are: Open windows for ventilation to let the polluted air spread at any time; Place green plants in the house to let the plants absorb formaldehyde; Use a purifier, such as anion, to filter formaldehyde; Use chemical collectors, such as formaldehyde collectors, to neutralize formaldehyde.Using these methods, you can minimize the formaldehyde content in your room.Let&#;s look at environmental protection first. Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.Zalaegerszeg, Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand,SiverodonetskWhich is better, ceramic tile or wooden floor, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance,SiverodonetskWood replacement floor, small water absorption, good insulation, self extinguishing, easy cleaning simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, especially foamed leather, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample the surface layer is thick, the wear-resistant layer is thick, and the service time is long, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution. Products of well-known brand manufacturers with business history are preferredLacquer cloth green ( piece)

Skin allergy.In today&#;s building materials industry, there are many events to make huge profits and even damage the interests of consumers.The bad atmosphere leads to the decline of consumer trust.Prices are in a state of confusion, consumers are confused and don&#;t know whether their efforts are worth it, so they all want to know that there is a relatively transparent price.Laminate floor is generally composed of four layers of materials, namely wear-resistant layer decorative layer, base material layer and balance layer (moisture-proof).Reinforced floor, also known as paper laminated wood floor, laminate floor. Qualified laminate floor is one or more layers specially used to impregnate thermosetting amino resin.The wood flooring produced in China mainly includes six categories: solid wood flooring, laminate flooring, solid wood composite flooring, multi-layer composite flooring, as well as the emerging wood plastic flooring.Natural wood is dried and processed into solid wood floor decoration materials.Also known as log floor, it is directly processed with solid wood.Wood grain grows naturally and has poor thermal conductivity. It can warm in winter and cool in summer. It has the characteristics of comfortable foot feeling and safe use. It is an ideal material for floor decoration such as bedroom, living room and study.Many people ask me, why do the prices of the same flooring brand differ so much?The main factors causing the price difference of laminate flooring are as follows, which is also an important production cost to determine the price of wood flooring.The quality of high-strength floor decoration paper is not high.Consumers who visit the building materials market know that the decorative layer of laminate flooring has all kinds of fine wood grains.The raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;new product, Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer. Rich colors and patterns.The biggest highlight is that they are not afraid of water and shop willfully anywhere.

The surface color of solid wood composite floor shall be determined according to the decoration area, furniture color and overall decoration design style of the customer&#;s home. First the dark brown floor looks simple for rooms with large area or sufficient light, and the light color floor looks spacious and bright for rooms with small area;Second, rooms with large area or sufficient light look bright with floors of different colors;Third, choose different colors of floors according to different decoration design sites. For example, the light color mild floor in the large living room can create a bright atmosphere, and the warm tone floor in the bedroom;Third, the color of furniture can be mixed with medium color floor, and the color of furniture can be mixed with warm tone floor.Latest quotation,The utility model adopts a three-layer solid wood composite floor,SiverodonetskIs formaldehyde content of laminate floor high, which is less durable than the double-layer floor, has good hand feeling, beautiful and generous, and contains a small amount of indoor formaldehyde. Simple installation and convenient construction: no wooden keel no waterproof treatment on the ground, no complex construction process, saving installation time and cost.Common cost methods for solid wood flooring are as follows:Siverodonetsk, Rich colors and patternsPrepare the floor for hardwood installationCompared with laminate flooring: pattern non laminate flooring.Comparison with solid wood flooring: strong glue must be selected for the production of solid wood composite flooring. Unlike the traditional solid wood flooring, only the wood itself is basically with glue.Although the environmental protection quality of super glue is very high, and the formaldehyde concentration can be basically ignored, it still exists.